Friday 4 March 2011

Test fit

Strap the frame together tightly with engine and gearbox to check frame alignment. Turns out the rear axle plates are 1/2" too far apart on one side.

2 comments:

  1. I've got a mini-lathe that can handle making wheel spacers and some round bar. I could probably knock up a spacer if you could supply me with the required dimensions (in metric - don't do Imperial!)

    I'm in London.

    ReplyDelete
  2. Hi there,

    Cheers nice one I'll have a look at what could be done. Its out on the sprocket side unfortunately and could be tricky with the snail cam thingy engaging with the frame. You got an email adress?

    ReplyDelete